Strap Toggle with Locking Clevis Pin

Strap Toggle with Locking Clevis Pin

ADD TO REQUEST LIST Go to Request List

TECHNICAL DRAWING

Used to reduce stress in rigging terminations and often used on mast and boat rigging interfaces, supplied with a single Locking Clevis Pin Assembly (CLPLA).

DATA TABLE

PART NUMBER (Ø) A B C D E F G
STPTLA-0003 7.94 9.0 17.0 8.0 30.0 18.0 15.7
STPTLA-0006 9.53 11.0 19.0 10.0 40.0 22.0 23.0
STPTLA-0008 11.11 12.0 22.0 11.0 45.0 25.0 25.03
STPTLA-0012 12.70 14.0 26.0 13.0 50.0 30.0 27.2
STPTLA-0017 15.88 17.0 29.0 16.0 65.0 37.0 36.1
STPTLA-0022 19.05 20.0 36.0 19.0 75.0 40.0 44.1
STPTLA-0030 22.23 23.0 43.0 22.0 90.0 46.0 55.0
STPTLA-0040 25.40 26.0 46.0 25.0 100.0 55.0 58.3
STPTLA-0048 28.58 30.0 54.0 29.0 115.0 60.0 71.0
STPTLA-0060 31.75 33.0 57.0 32.0 125.0 70.0 73.4
STPTLA-0091 34.98 37.0 69.0 35.0 140.0 80.0 80.8
STPTLA-0115 38.10 40.0 80.0 38.0 150.0 85.0 84.4
STPTLA-0150 44.45 47.0 87.0 45.0 180.0 100.0 104.5
STPTLA-0170 47.63 50.0 94.0 48.0 190.0 105.0 111.3
STPTLA-0220 53.98 56.0 106.0 54.0 215.0 120.0 125.5
STPTLA-0260 63.50 65.0 121.0 63.0 255.0 135.0 155.3
STPTLA-0320 69.00 71.0 131.0 69.0 275.0 150.0 165.0
STPTLA-0360 73.03 75.0 145.0 73.0 290.0 165.0 168.0
STPTLA-0430 73.03 75.0 145.0 73.0 290.0 165.0 168.0
STPTLA-0540 83.00 85.0 165.0 83.0 330.0 185.0 194.8

  • Non-locking version also available.
    • Part number: STPTA-XXXX
    • Size range: -0003 to -0060
  • All dimensions are expressed in millimetres (mm) unless otherwise stated.
  • All dimensions have a +/- 0.25 tolerance unless otherwise stated.
  • All data is subject to design change, these changes may take place without prior notification.
  • Further information and details of larger sizes available upon request.

DOWNLOADS