Standard Turnbuckle

TECHNICAL DRAWING

A stylish deck turnbuckle that can be adjusted under load. Features the unique modular N-Series design to improve usability and reduce the impact on our environment. Standard lower termination is a fork toggle assembly. Cross pins are pressed up to -0060, CRPLA used thereafter.

DATA TABLE

PART NUMBER PIN DIA (A) FST GAP PIN TO PIN BARREL DIA DEPTH FAT THICKNESS MINIMUM MAXIMUM WEIGHT
NTRA-0004 9.53 12.00 40.00 20.00 25.00 20.00 252.40 342.40 0.570
NTRA-0006 9.53 12.00 40.00 20.00 25.00 20.00 252.40 342.40 0.567
NTRA-0008 11.11 13.00 45.00 22.00 30.00 23.00 284.80 374.80 0.781
NTRA-0010 12.70 15.00 50.00 26.00 30.00 27.00 321.50 421.50 1.202
NTRA-0012 12.70 15.00 50.00 26.00 30.00 27.00 321.50 421.50 1.198
NTRA-0015 15.88 18.00 65.00 28.00 40.00 30.00 354.50 454.50 1.705
NTRA-0017 15.88 18.00 65.00 28.00 40.00 30.00 354.50 454.50 1.696
NTRA-0022 19.05 21.00 75.00 32.00 50.00 33.00 433.50 583.50 2.702
NTRA-0030 22.23 24.00 90.00 42.00 50.00 44.00 472.70 622.70 4.699
NTRA-0040 25.40 25.40 100.00 42.00 60.00 48.00 493.90 643.90 5.625
NTRA-0048 28.58 31.00 115.00 46.00 60.00 55.00 536.10 686.10 6.909
NTRA-0060 31.75 34.00 125.00 52.00 70.00 57.00 616.80 816.80 10.597
NTRA-0076 34.93 37.00 140.00 64.00 80.00 69.00 674.30 874.30 16.706
NTRA-0091 34.93 37.00 140.00 64.00 80.00 69.00 678.10 878.10 16.753
NTRA-0115 38.10 40.00 150.00 74.00 90.00 80.00 733.90 933.90 23.765
NTRA-0150 44.45 47.00 180.00 80.00 100.00 87.00 835.70 1085.70 33.190
NTRA-0170 47.63 50.00 190.00 89.00 110.00 94.00 890.60 1140.60 41.491
NTRA-0195 53.98 56.00 215.00 98.00 125.00 106.00 951.50 1201.50 56.491
NTRA-0220 53.98 56.00 215.00 98.00 125.00 106.00 948.60 1198.60 56.275
NTRA-0260 63.50 65.00 255.00 108.00 135.00 121.00 1079.30 1254.30 76.935
NTRA-0320 69.00 71.00 275.00 114.00 155.00 131.00 1095.00 1370.00 78.713
NTRA-0360 73.03 75.00 290.00 130.00 165.00 145.00 1192.50 1367.50 108.81
NTRA-0430 73.03 75.00 290.00 130.00 165.00 145.00 1198.00 1473.00 108.622
NTRA-0540 83.00 85.00 317.00 150.00 190.00 165.00 1325.90 1675.00 164.302

  • All dimensions have a +/- 0.25 tolerance unless otherwise stated.
  • All data is subject to design change, these changes may take place without prior notification.
  • Further information and details of larger sizes available upon request.
  • Custom Refit Applications available on request.

DOWNLOADS