Spreader Bend
Art. 70103
TECHNICAL DRAWING
A protective stainless steel sleeve used to reduce fatigue on rods passing over spreader ends. Commonly used on smaller boats for a cost effective alternative to a tip cup.
DATA TABLE
| PART NUMBER | (Ø) A | (Ø) B | C | D | WEIGHT (KG) |
|---|---|---|---|---|---|
| SPB-0004 | 7.50 | 12.50 | 25.00 | 35.00 | 0.012 |
| SPB-0006 | 8.00 | 15.80 | 25.00 | 35.00 | 0.018 |
| SPB-0008 | 9.00 | 17.80 | 30.00 | 41.00 | 0.028 |
| SPB-0010 | 10.00 | 17.80 | 40.00 | 56.00 | 0.039 |
| SPB-0012 | 10.00 | 17.80 | 40.00 | 56.00 | 0.038 |
| SPB-0015 | 11.00 | 18.80 | 45.00 | 63.00 | 0.047 |
| SPB-0017 | 11.00 | 18.80 | 45.00 | 63.00 | 0.040 |
| SPB-0022 | 13.00 | 24.80 | 70.00 | 50.00 | 0.084 |
| SPB-0030 | 15.00 | 24.80 | 60.00 | 84.00 | 0.106 |
| SPB-0040 | 16.75 | 30.20 | 65.00 | 91.00 | 0.158 |
| SPB-0048 | 18.25 | 34.80 | 70.00 | 98.00 | 0.214 |
| SPB-0060 | 21.00 | 37.50 | 75.00 | 105.00 | 0.261 |
- Maximum recommended bend angle 150
- All dimensions have a +/- 0.25 tolerance unless otherwise stated.
- All data is subject to design change, these changes may take place without prior notification.
- Further information and details of larger sizes available upon request.
- Custom Refit Applications available on request.
