Chainplate Jaw

TECHNICAL DRAWING

To suit OYS Standard Eye Jaw Toggles, Eyes or Barrel Pin Eyes.

DATA TABLE

DASH HOLE JAW WIDTH DEPTH (MIN)
-0003 7.94 C9 9.00 10.00
-0004 9.53 C9 11.00 12.00
-0006 9.53 C9 11.00 12.00
-0008 11.11 C9 12.00 14.00
-0010 12.70 C9 14.00 16.00
-0012 12.70 C9 14.00 16.00
-0015 15.88 C9 17.00 20.00
-0017 15.88 C9 17.00 20.00
-0022 19.05 C9 20.00 24.00
-0030 22.23 C9 23.00 28.00
-0040 25.40 C9 27.00 32.00
-0048 28.58 C9 30.00 36.00
-0060 31.75 C9 33.00 40.00
-76 34.93 C9 13.01 .0100
-91 34.93 C9 13.01 .0100
-115 38.10 C9 16.01 .0100
-150 44.45 C9 23.01 .0100
-170 47.63 C9 02.01 .0100
-195 53.98 C9 08.01 .0100
-220 53.98 C9 08.01 .0100
-260 63.50 C9 17.01 .0100
-320 69.00 C9 23.01 .0100
-360 73.03 C9 03.01 .0100
-430 73.03 C9 03.01 .0100
-540 83.00 C9 12.01 .0159
-640 95.00 C9 01.01 .0100
-750 110.00 C9 16.01 .0100
-1000 - 07.01 .0159

  • All dimensions are expressed in millimetres (mm) unless otherwise stated.
  • All dimensions have a +/- 0.25 tolerance unless otherwise stated.
  • All data is subject to design change, these changes may take place without prior notification.
  • Further information and details of larger sizes available upon request.

DOWNLOADS